There are two main types of springs, torsion and extension. Extension springs go along the tracks parallel to your ceiling. Torsion springs are wrapped about a bar that is above your garage door opening.
It will be very hard or totally not possible to open your garage door if one of your springs is broken. This may be actually inconvenient in case you are attempting to open your garage door to get your car out. It can be even more trying if you are going someplace important, like work.
Require aid soon? Try this garage door opener
Torsion springs are tough to change. If you have had no definite hands on training on how to replace your tension spring, don’t even think about it. Not only that, but torsion springs are difficult to find at local stores. Extension springs may be replaced by an enterprising do it yourself homeowner. A limited supply of extension springs can be found at hardware or home improvement stores.
While a lot of garage door repairs necessitate a qualified technician to make the repairs, there are some things that a home owner can successfully work on. One of those items is the stop/reverse lights.
By far the most universal sensor that stops and reverses your garage door is a set of "eyes" that are located toward the bottom of your garage door’s track on either side of the door.
Sometimes your garage door’s "eyes" can get bumped in such a way that they are no longer pointing to each other. If that is the case, cautiously adjust the beams. Do not strike them with a hammer. There are adjusting brackets attached to the tracks that ought to be adjusted with a screw driver.
If your garage door still refuses to go down and stay there, keep looking. Persistence will pay. You will ultimately find an object blocking your garage door’s "eyes.
If there’s nothing noticeably blocking your garage door, don’t tear your hair out. There’s one more thing to try. Obtain a paper wipe and clean the lenses on your stop/reverse lights. Now and then condensation or a little bug or dust particle can get on the lense and cause all your stop/reverse problems.
If wiping the lenses does not make your issue go away, the responsibility may lie with your garage door opener. You may have a bad sprocket or bad logic board.
It is doable for a home owner to replace both the gear sprocket and logic board. The difficulty is getting the right parts and learning exactly how to replace each item. Sometimes life is less complicated if you just get in contact with a garage door specialist to do the replacement. They’ve served hundreds of people and they can assist you too.
Look here for futher information see here
Since garage doors don’t fail to work very often, most people are caught unaware of what to do to get it fixed. Most people make some attempt to trouble shoot their difficulty before they give up and phone a garage door company. Hopefully this article has given you some insight into what items you can fix yourself and what items should best be left to a professional.