Garage doors have two main types of springs. Extension springs run along the horizontal tracks on either side of your garage. They get their power by extending. Torsion springs run along a bar you can see above your garage door when it is closed. Torsion springs get their power from twisting.
It will likely be very exhausting or totally not possible to open your garage door if one of your springs is broken. This may be actually inconvenient if you are attempting to open your garage door to get your automobile out. It can be much more trying if you're going someplace vital, like work.
While the typical homeowner should by no means try to replace an torsion spring without specific training, extension springs are possible to replace. Replacement springs can generally be found in big box stores.
This information may help you new garage door opener remote
There are a number of items concerning your garage door that you can trouble shoot and repair youself. If you own a garage door opener then you also have some type of interrupter device that can keep your door from closing if an object is in the way. More often than not they are stop/reverse lights.
If your garage door begins going down, then stops and goes back up, accompanied by your garage door opener's lights blinking, you have a difficulty you on which you can work
From time to time your garage door eyes will stop and reverse your door when there's no apparent reason. One cause may be that your stop/reverse units have been bumped and are no longer pointing at each other. If you suspect that is the problem, make use of the set screws or wing nuts to adjust the lights, not a hammer.
If your garage door still refuses to go down and stay there, keep looking. Persistence will pay off. You'll ultimately see something blocking your garage door's "eyes.
If there's nothing visibly blocking your garage door, don't pull your hair out. There's one more thing to try. Obtain a paper wipe and clean the lenses on your stop/reverse lights. Occassionally condensation or a small bug or dust particle may get on the lense and cause all your stop/reverse problems.
If your door is still acting irradically the trouble may not be your stop/reverse lights after all. You may have a issue with the logic board or the gear sprocket in your opener.
It is doable for a home owner to replace both the gear sprocket and logic board. The trouble is finding the right components and learning just how to replace each item. More often life is easier if you just get in contact with a garage door professional to complete the replacement. They've served hundreds of people and they can help you too.
For more information try this home.
Since garage doors do not fail to work very often, most people are caught unaware of what to do to get it fixed. Most people make some attempt to trouble shoot their problem before they give up and phone a garage door business. Hopefully this article has given you some insight into what items you can fix yourself and what items should best be left to a professional.